1.1 General Information
The Hot Shell Tensile Tester is equipped with a loading mechanism, heating mechanism,
and sensing mechanism. These are controlled by a microcontroller or PLC and displayed
via LCD. By default, it measures Hot Tensile Strength.
With additional attachments, it can also measure:
- Cold Tensile Strength (Refer 4.2.1)
1.2 General Usage
Designed as a complete unit where forming, curing, and breaking of the specimen are
performed in the same position.
Fill sand in the jaw cavity → Press START → After curing, the equipment displays
Hot Tensile Strength automatically.
1.3 Product Data
- Product Name: Hot Shell Tensile Tester M
- Product Code: VHTD
- Order Reference Code: V0000042
- Electrical Supply: 230V AC 50Hz (Default) / 110V AC 60Hz (Optional)
- Plug Type: M-Type, 15 Amp
- Maximum Current: 10.6 A at 230V
- Compressed Air: Not Required
- Communication: RS485 MODBUS RTU, RS232, Ethernet (Optional), CloudSync (V-Sync)
- Dimensions: 615 × 385 × 475 mm
- Packing Dimensions: 715 × 485 × 625 mm
- Net Weight: 46 kg
- Gross Weight: 56 kg
- Colour: Factory Default
- Measuring Range: 50 Kg/cm²
- Traceable To: NABL Standards
- Least Count: 0.05 Kg/cm²
- Specimen Requirement: Not Required
- Operating Temperature: 0–50°C
- Testing Standards: BIS Standard, AFS Optional
- Calibration Frequency: 14,500 test cycles or once per year
2.1 Scope of Supply
- Hot Shell Tensile Tester
- Jaw Set
- Tray, Sand Sampler & Lifting Tong
- Calibration Certificate
- Instruction Manual
